3in Disc Industrial Air Die Grinder 90 degrees Right Angle Non Eccentric Pneumatic Grinder 10000rpm

Feature: 1. PORTABLE DESIGN: Industrial grade pneumatic grinder, small size, light weight, low running vibration, with ergonomic grip, which is easy to operate. 2. DURABLE MATERIAL: Made of zinc alloy material, wear and corrosion resistant, the handle is wrapped in a red protective cover, safe and reliable. 3. HIGH EFFICIENCY: The air die grinder has 3in grinding disc, and the no load speed can reach 10000rpm, which greatly improves the grinding efficiency. 4. STANDARD INLET: This pneumatic grinder has a 14in air inlet and is equipped with a standard air inlet connector for easy installation and use. 5. APPLICABLE SCENES: Suitable for local grinding focal areas, removing solder joints and rust spots on metal products, and deburring wood products, etc. Specification: Item Type: Air Die Grinder Model: YDE8982B Disc Size: 3in (75mm) No Load Speed: 10000rpm Air Pressure: 90psi (6.3kgcm2) Air Consumption: 4.0cfm Air Inlet: 14in. Package List: 1 x Air Die Grinder1 x Sanding Pad1 x Wrench1 x Intake Port Note: Operation Suggestion: 1. Before and after use every day, please inject 2?3CC of #60 pneumatic lubricating oil (sewing machine oil) from the air inlet2. Let the machine idle for a few seconds after filling with oil3. Generally, the air source compressed by the traditional air compressor contains water, and the lubricating oil in the air compressor brought out by the air compressor piston. If the oil water separator is not used, the water and oil enter the pneumatic tool with the air, which will cause wind If the blade is stuck, once the tool is started, the blade will not be thrown away, and it may not even be able to start. If it can be started, the torsion will be insufficient. Be sure to pay attention to refueling regularly to keep the tool at normal torsion.PORTABLE DESIGN: Industrial grade pneumatic grinder, small size, light weight, low running vibration, with ergonomic grip, which is easy to operate. DURABLE MATERIAL: Made of zinc alloy material, wear and corrosion resistant, the handle is wrapped in a red protective cover, safe and reliable. HIGH EFFICIENCY: The air die grinder has 3in grinding disc, and the no load speed can reach 10000rpm, which greatly improves the grinding efficiency. STANDARD INLET: This pneumatic grinder has a 14in air inlet and is equipped with a standard air inlet connector for easy installation and use. APPLICABLE SCENES: Suitable for local grinding focal areas, removing solder joints and rust spots on metal products, and deburring wood products, etc.