Smart Lock 30 Sets Password 200 Sets IC Card Mechanical Key Unlocking Smart Electronic Lock for

Feature: 1. Easy to Install: Only need to replace the lock cylinder can you install the smart lock, no drilling installation, convenient and fast. 2. Multiple Unlocking Methods: You can unlock by password, IC card and mechanical key. This smart lock supports up to 30 sets of passwords and 200 sets of IC cards, making you feel safe and convenient. 3. Anti Theft: This smart door lock supports virtual anti peeping password, you can enter a random password before or after the correct password to make your use more secure. 4. Mechanical Key Available: Comes with a mechanical key and an external power port in case the battery runs out. And the lock adopts low power consumption design. In general, you can use it normally. 5. Applicable Doors: This smart lock is suitable for installation of wooden doors, iron doors, security doors, etc. Specification: Item Type: Smart Lock Material: Stainless Steel (Handball), Brass (Lock Cylinder) Uses: Suitable for home use, hotel apartments, government units Fitting Door: Security Door, Wooden Door Suitable for Door Thickness: Approx. 40mm to 100mm/ 1.6 to 3.9in Lock Body: CN Standard, European Standard, Large Lock Body Open Method: Swipe Card, Password, Key Password Capacity: 30 Groups of Passwords RF Card Capacity: IC Card 200 Pieces Mechanical Key: Magnetic Induction Key Working Power: 3 x AAA (Without) 3.6V-5V Alarm Voltage: 3.6V Emergency Power Supply: MicroUSB Standby Current: Less Than 10uA Operating Current: Less Than 135mA Adapt to Temperature: -20 degrees C to 70 degrees C Installation Time: No Drilling, No Need to Replace the Lock Body, the Installation Time is Less Than 5 Minutes How to Use: 1. Remove the original lock cylinder: Use tools to unscrew the old lock cylinder fixing screws, remove the original mechanical lock cylinder (applicable to upgrades), and prohibit the lock body, front and rear panels, and side panels (applicable to new installations) 2. Handball after removing the smart lock cylinder: Use the equipped special tool to remove the handball after the smart lock cylinder 3. Install the smart lock cylinder: Install the smart lock cylinder into the front panel and adjust the position according to the lock cylinder fixing screws 4. Install the smart lock cylinder fixing screws: Install the mechanical core fixing screws 5. Handball after installation: 1. Reinstall the rear handball and use special tools to tighten the screws. 2. Use the rear handball to test whether the smart lock cylinder is installed correctly, and check whether the rear handball can open the door normally. 6. Install the battery 1. Take off the front acrylic plate of the front handball, and use a special tool to remove the battery cover. 2. Put 3 x AAA standard batteries in the battery box, pay attention to the direction of the positive and negative poles of the battery, and the spring end is the negative pole 3. Install the electric ground cover, tighten the battery cover screws, and replace the front acrylic plate. 7. Test after installation 1. Check whether the door town is firmly installed on the door and whether the handball can open normally. 2. After connecting to the power supply, the motor reverses, and the handball is idling before turning it. Enter the initial password to see if the door can be opened normally.. Package List: 1 x Door Lock2 x Key3 x IC Card1 x Suction Cup1 x Screwdriver1 x Instruction Manual