Function
1. 12/24H ℃/℉ Switching
℃/℉:Press "UP" key to switch ℃/℉
2. Display Mode Switching
Time Display---Press “SET” key---dP-1 display---Press “SET” key--dP-2 display
dP-1:Time+TEMP display for 10s---Year Month and Date display for 5s---Cyclic display
dP-2:Always Time+TEMP display
3. Three Sets of Alarms
Workday alarm settings
ON:E--Everyday Alarm
--：E---Workday Alarm
4.Brightness Adjustment
3 level Manual Brightness Adjustment
L1:Brightest,L2:Medium,L3:Darkest
Default brightness is L1，press and hold “UP” key,then press “DOWN” key to adjust brightness
4.Saving Mode
Saving Mode：Press “DOWN” key---"--Sd"--Press"DOWN" key---"onSd"---Screen will be off in 5-10s
5. Voice-activated Function
Voice control works when saving mode("onSd")
When the sound of clapping or tapping the table is greater than 90 dB, it can wake up the screen to light up for 10s
"--Sd":Screen will be always on if USB Powered(Plug Not Included)
6.Power-off Memory Function
Unscrew the 2 screws with a screwdriver, putting CR2032 battery (Battery Not Included) and Tighten the screws.
CR2032 Battery (Not Included)only for Power-off memory,no need to set time again if power cut.
Clock can not be powered by CR2032 Battery(Not Included)
Product Show
Color:As picture show
Input Voltage : 5V 0.5A or 5V 1A
Size : 15*7*4cm/5.9*2.76*1.57in
Package：1xWooden Alarm Clock
1xInstruction
1x100cm USB Cable
Note:Voice control works when saving mode("onSd")
When the sound of clapping or tapping the table is greater than 90 decibels, it can wake up the screen to light up for 10s
"--Sd":Screen will be always on if USB Powered(Plug Not Included)
Saving Mode：Press “DOWN” key---"--Sd"--Press"DOWN" key---"onSd"---Screen will be off in 5-10s
