110V 220V Incubator Digital Temperature Controller Thermostat Switch Probe Tester
Description:
·Size: As shown in the picture
·Supply Voltage: AC 110V/220V, switched automatically
·Temperature Measurement range: -50~ +110 degree Celsius
·Temperature Control Range: -50~ +110 degree Celsius
·Control Accuracy: 0.1 degree
·Measuring Input: NTC10K
·Output Type: Direct Output
·Output Capacity: MAX10A
Instructions:
1.Set the startup temperature:
Press UP key once to start the display temperature. Press and hold UP key for about 3 seconds to start the temperature digital flashing. Use UP/DOWN key to set the desired temperature value.
2.Set the stop temperature:
Press the DOWN button to display the stop temperature. Press and hold the DOWN button for about 3 seconds to stop the temperature digital flashing. Use the UP/DOWN keys to set the desired temperature value.
3.How to restore the factory settings:
When power is on, press and hold UP/DOWN at the same time, the digital tube display 888 will then automatically jump to the detected temperature, that is, restore the factory settings.
Package Includes:
1 x W3001 110V/220V Incubator Digital Temperature Controller
Vrácení peněz při nedoručení
