Handheld Oscilloscope 2 Channel 120MHz Bandwidth 2.8in LCD Backlight Display 3 Scan Modes Digital Oscilloscope

Feature: 1. [High Bandwidth] 2 channel handheld oscilloscope, 120MHz bandwidth, minimum range 10mV div, 500MSa s sampling rate, advanced digital trigger system. Up to 120M bandwidth easily cope with various fields of measurement test. 2. [FFT Spectrum And Cursor Measurement] Professional portable oscilloscope with FFT display function can analyze the spectral characteristics of the signal. Cursor measurement function, convenient for manual measurement of period, frequency and voltage. 3. [Multi Function] DIY oscilloscope kit is configured with 3 trigger modes, auto, normal and single trigger. Support time base, amplitude, trigger slope and other waveform parameters settings, support waveform one key AUTO automatic screen adaptation, no need to adjust parameters. 4. [High Accuracy And Range] The bottom of the digital oscilloscope can output sine wave, square wave, triangular wave, half wave, for singer wave and other 2.5V amplitude waveform, the frequency adjustment range of sine wave is 0‑10MHz, other waveform frequency range 0‑2MHz, up to 0.1Hz accuracy. 5. [14 Measurement Options] Handheld digital oscilloscope has 14 measurement options available, including frequency, Peak to Peak, duty cycle, amplitude, RMS, average, period, + pulse width, ‑ pulse width, maximum, minimum, top, and bottom. 6. [Built In ARM And FPGA] This handheld oscilloscope multimeter uses ARM and FPGA chips with it to provide high speed signal acquisition and high speed data processing, giving you a better experience and rich functions. 7. [Multi Application] Digital oscilloscope can be used for mcu debugging, auto repair, home appliance repair, DIY debugging, gaming, power supply debugging, inverter, etc. It can also be used as a portable tool for on site debugging. Specification: Item Type: Handheld Oscilloscope Material: ABS Built in Battery: Lithium Battery 3000mah Number of Channels: 2 Screen Size: 2.8 Inches Screen Resolution: 320 x 240 Analog Bandwidth: 120M (Single CH1) Sampling Rate: 500M Rise Time: <3ns Storage Depth: 128Kb Input Impedance: 1M Ohm Time Base Range: 5ns 10s Vertical Sensitivity: 10mV div 100V div Maximum Measurement Voltage: + 40V (Probe 1x Gear), + 400V (Probe 10x Gear) Trigger Mode: Auto, Normal Trigger Type: Rising Edge, Falling Edge Display Mode: YT, XY, Roll Afterglow Time: None, 1s, infinite One Button Auto: Support Waveform Measurement: 14 Kinds Measurement Accuracy: + 2percent XY Mode: Support Waveform Saving: Support Frequency Accuracy: + 0.01percent Single Trigger: Support FT: Support Signal Source Amplitude: 2.5V+ 0.05 Signal Source Frequency: Sine 0 10M, Other 0 2M. Package List: 1 x Handheld Oscilloscope2 x Probe1 x Type C Cable2 x Clamp Cable1 x RCA Cable4 x Plastic Ring1 x Adjustment Tool2 x Probe Cover1 x Storage Bag1 x Instruction Manual