Electric Cooling Fan Thermostat Kit 175 to 185 Fahrenheit 40A NPT 3 8in Thread Electric Fan Wiring Relay Kit for

Feature: 1. Easy Installation: This cooling fan thermostat kit comes with a NPT 3 8in thread, easy to install, no need to spend hours tinkering, ideal for individuals and professional mechanics. 2. Practical Kit: The kit includes everything you need to connect your fan, including a brass adapter for installing the sender unit, necessary wiring harness, relay switch, circuit breaker, terminals, and installation screws. 3. Precise Temperature Control: The fan relay kit features a temperature sensor switch that is set to open the electric fan at a temperature of 185 Fahrenheit and close it at 175 Fahrenheit. It is compatible with any 12V system, giving you superior temperature control and preventing overheating. 4. Premium Materials: Made of plastic and metal material, this fan wiring kit is sturdy and resistant to rust, wear and tear, ensuring long lasting performance for years to come. 5. Versatile Application: Designed to offers a universal fit, the wiring relay kit is suitable for a wide variety of DC12V vehicles. It delivers optimal performance and greatly increases the efficiency of your vehicle s cooling system. Specification: Item Type: Electric Cooling Fan Thermostat Kit Material: Plastic, Metal Working Voltage: DC12V Current: 40A Working Temperature: 175 185 degrees F on off Applicable: Universal Replacement for: 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 Engines Single switch installation: 1. Place the cooling fan switch near the thermostat housing behind the distributor assembly on the left side of the engine. Switch cable color should be green and black. 2. Disconnect the cable terminal of the cooling fan switch. 3. Let the engine coolant temperature close to 196 203 degrees F (91 95 degrees C). 4. Use an appropriate ohmmeter or connectivity tester to check the connectivity between the switch terminals of the two fans. The fan switch should be on (switch closed) at the above temperature. When the temperature drops 5 15 degrees F (3 8 degrees C) from the temperature at which the switch is first switched on (switch closed), the switch should not be switched on (switch off). 5. If the switch does not operate within the information provided, allow the engine to cool below 100 degrees F (37 degrees C) and replace the switch. Wiring Note: For two red lines, connect the long red line to the fan and the short red line to the battery. 1. Install the relay as conveniently as possible under the hood near the fan. Note: Do not use PTFE tape or threaded compounds on thermostats or adapters. In order to operate properly, the thermostat must be grounded to the engine through a thread, and the engine must be grounded. 2. Install the thermostat in the head or intake manifold. Connect the black wire to the thermostat and cut to the appropriate length. Crimp the red terminal to the black wire and connect it to the thermostat. 3. Route the red line and connect it to the fan + terminal or the power cord from the fan motor with to electric fan printed on it. 4. Install the supplied circuit breaker in a convenient location as close as possible to the power supply you use for the fan relay (battery or large terminal on the starting solenoid valve). 5. Neatly route the red line from the relay to the side circuit breaker installed in the step. Cut to appropriate length and install using small yellow ring terminals. Use another small yellow ring terminal to remove the remaining red line and connect the unused terminal on the circuit breaker to the battery source. This wire is stamped with the words Connect to battery constant heat 6. Connect the brown wire to the ignition switch or fan switch (Choose the more convenient way). Installation Note: 1. Turn off the engine and replace the new cooling fan temperature switch when the water in the engine radiator cools to room temperature. 2. Avoid high external heat sources after installation. 3. Avoid spilling water on the surrounding car parts during installation.. Package List: 1 x Electric Cooling Fan Thermostat Kit (17Pcs) Note: Placing the electric cooling fan switch inside the thread may damage the component. This test must be conducted using coolant as water has a lower boiling point than the temperature required by some sensors. Please perform this process in a safe and well ventilated area. Do not inhale any fog produced by heating the coolant. Wear protective goggles and avoid connect with any heated components. Do not use heating devices that produce open flames.