50-230 Degrees 5V/12V/24V Celsius PTC Heaters Heating Element Hair Dryer Accessories Curlers Heater

Label:Yes Sales unit: 1pc Lead wire: high temperature line Do not soak in water, and do not remove the surface film Temperature: 50-230 degrees Celsius Application: Heating appliance Heat methods: heat conduction Size: Appx.8 x 12 x 3mm Heat material: PTC Thermistor PTC heating element Product Name: Ceramic Heating Sheet Input Voltage: 5V/12V/24V

Usage: Food dehumidification, tea drying, electronic chip preheating, instrument heating dehumidification, electronic components constant temperature preheating. Advantages of PTC constant temperature heating pads: In small and medium-sized power heating applications, PTC heating pads have constant temperature heating, no open flames, no redness on the surface, and high heat conversion rate Love power supply voltage fluctuations have advantages over traditional heating elements such as small impact on the machine and long service life, Small size, easy to install and secondary development. The surface remains constant temperature and will not damage the heated equipment due to continuous temperature rise. Without open flames, it is not easy to cause fires and explosions. Energy saving, suitable for year-round insulation and preheating of small and dry power equipment Long lifespan, manufactured using year-round automated unmanned small equipment for heating and dehumidification. It can be cooked frequently in the afternoon, and when heating the liquid, it will not be damaged even if it burns dry. The power can be automatically adjusted, with fast heat dissipation and high power. If the heat dissipation is small, the power will automatically decrease. PTC constant humidity heating pad power selection: 220V heating pads can directly use 220V power frequency AC power Low voltage heating pads should use a power supply that has the same voltage as the heating pad: usually a switching power supply, transformer The power (capacity) of batteries, batteries, large capacity dry batteries, etc. should be six times higher than the maximum consumption of the heat exchanger Only with micro power can the heating plate generate heat normally. For example, for a 12V12W heating element, the maximum dissipation power is 12, and the power supply should use a 12V1A or 12V12W or higher capacity power supply. Precautions for using PTC constant temperature heating pads： Guan Zi Power: The heating power varies from small to large, then to small, and finally stabilizes. Package include : 1Pc PTC heating element Notice: 1.Transition: 1cm=10mm=0.39inch. 2.Please allow 1-2mm error due to manual measurement and make sure you do not mind before ordering. 3.Please understand that colors may exist chromatic aberration as the different placement of pictures.