Ultra Thin Mini Oled Battery Voltage Meter 0-30V Dc 1-6S Lithium Battery Tester Real Time Percentage Power Display

Quantity : 1 High-concerned chemical : none Package : SOP is_d : Yes Supply Voltage : DC 0-30V Type : Module Operating Temperature : 0-50C Origin : Mainland China Condition : New Feature 1 : 0.5 Inch OLED Screen Feature 2 : 1-6S Lithium Battery Feature 3 : 0-30V DC Voltmeter Feature 4 : Mini Thin Voltage Meter Feature 5 : Battery Percentage Display Feature 6 : High Precision Voltage Tester Feature 7 : RC Model Battery Indicator Feature 8 : DIY Power Supply Voltmeter Feature 9 : Electric Scooter Battery Meter Feature 10 : Anti Reverse Connection Voltmeter

Product Features 1. Ultra thin mini design, easily embedded in various compact device spaces 2. 0.5-inch high-definition OLED screen, clear visibility under strong light 3. Can be used in 1-6S lithium battery systems, without voltage regulation, reverse connection without burning 4. Intelligent percentage battery display, real-time monitoring of remaining battery life 5. Digital display voltage+battery dual mode, with an accuracy of ± 0.1%

Product Introduction This voltmeter adopts a 0.5-inch OLED display screen and high-speed MCU, high-precision 12 bit ADC sampling, and stainless steel casing. The compact size with a thickness of only 3.8mm makes it practical and aesthetically pleasing overall. The header displays a voltage value and calculates the percentage of remaining battery power based on the battery voltage.

Product Specifications Working voltage: 4.5-30V Measurement voltage: 0-30V Working current: ≈ 10mA Measurement accuracy: ± 0.1V Sampling rate: ≈ 250 times/S This meter head can measure 0-30V voltage in real time, but the percentage of electricity needs to be set to the corresponding string number, otherwise the percentage display will be relatively inaccurate.

Method for setting the number of battery strings Short circuit the number of strings with tweezers to set the solder pad and negative electrode for two seconds (similar to long pressing a button), and hold for about 3 seconds. The STD character on the right side of the screen starts flashing, indicating that it has entered the serial number setting mode. Afterwards, tap the short-circuit string number to set the solder pad and negative electrode, which can cycle between 1-6 strings. The number displayed in the box corresponds to the corresponding string. After stopping the operation for 5 seconds, the system automatically saves and exits the setting mode.

Packing List Voltage and electricity meter * 1 label:yes