Joom: ეს მოწყობილობა პროფესიონალურ სამედიცინო რჩევას, დიაგნოზის დასმის პროცესს ან მკურნალობას არ ანაცვლებს. ეჭვის ქონის შემთხვევაში, გამოყენებამდე მიმართეთ ჯანდაცვის კვალიფიცირებულ სპეციალისტს. გამყიდველი/დისტრიბუტორი პასუხისმგებელი არ არის არასწორად გამოყენების, არაავტორიზებული მოდიფიკაციის ან მოხმარების მითითებული წესების გარდა სხვაგვარი გამოყენების შედეგად გამოწვეულ ზიანზე.
-----
Description
Report Item
O-Star
Samrt but poweful making a big difference
7 modes to fully meet a variety of clinical needs
Uniform beam,strong penetrability
Less light loss
Light intensity up to 3000 mW/cm²
Charging base with
Technical Specifications :
Size of main uint: 23mm×23mm×204mm
Net weight of main unit: 108g
Applied parts of the equipment: Top of main unit, Point cure lens
Duty cycle of the equipment: 20 Sec on/20 Sec off
classified by power supply
The power supply by the rechargeable battery
Rechargeable Lithium battery:
Battery model:18500, Battery capacity: 2000mAh
Battery has over-voltage, over current and short circuit protection
Adapter(charge) Input: 100-240V~ 50/60Hz 0.4A Max.
Output: 5.0V 1A
The adapter must be complies with IEC 60601-1 and IEC 60601-1-2
10W high power
Wave length: 385nm~515nm
Class: class 2 AEL: 3.9×10-3J
7 MODES TO FULLY MEET A VARIETY OF CLINICAL NEEDS
Like an all star, O-Star is strong in performance, well-controlled and can fully meet various clinical needs.
Normal High Turbo Ortho Soft Pulse Check
Normal Mode
Constant light intensity:
1000- 1200mw/c㎡
Suitable for most treatment scenarios,
such as illings, restorations, etc.
Time setting: 5s, 10s, 15s, 20s
High Mode
Constant light intensity:
1 800-2000 mw/c㎡
Suitable for quick curing,
ensuring enough curing depth
Time setting: 3s, 5s
Turbo Mode
Time setting: 1s, 3s
2700-3000mw/c㎡
Ultra-high light intensity enables
1 sec curing of 2mm resin.
Ortho Mode
Time setting: 3s*5, 3s*10
2700- 3000mw/c㎡
High light intensity with
strong penetrability,
especially suitable for
orthodontic bracket bonding
Soft Mode
Light intensity is gradually increased
from 0 to 1200mw/c㎡
Time setting: 5s, 10s, 15s, 20s
Effectively reduce the
shrinkage rate of resin;
Lower the risk of microleakage
Pulse Mode
The LED will stop for 0.4s at an
interval of 0.6s curing.
When working in a cycle of treatment,
it can effectively reduce heat generation,
efficiently dissipate heat and ensure
the comfort of diagnosis and treatment.
Time setting: 5s, 10s, 15s, 20s
Check Mode
This mode outputs a single
purple light. When special glasses
are worn, the caries are
obviously orange-red.
Application: Detection of caries,
calculus and cracked tooth
