【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
[For APP control]: After downloading the "GodoxPhoto" APP, you can connect the X2T-S to your smartphone or tablet to control the flash mode, output, modeling light mode and Godox beep sound. This is very useful when taking product photos in the studio and it is difficult to reach the top of the camera with the wireless trigger.
[Pro features]: Supports TTL auto flash, 1/8000s high-speed sync, multi-flash, manual flash, flash exposure compensation, scan settings, one-shot and multi-shot settings, modeling lamp control, simultaneous adjustment of output values of all groups, etc.
【Effectively Avoid Signal Interference】: Uses 5 groups, 32 channels and 99 wireless ID settings to limit interference from other nearby systems. The trigger function is valid only when the channel and wireless ID settings of the master and slave devices are the same.
【Easy to operate】: LCD with clear display effect, 5 group setting buttons and 3 function buttons realize quick setting. With a relocated control wheel, new hot shoe locking mechanism, new AF assist light that uses visible light instead of infrared patterns, and USB-C connectivity, it's more modern and reliable than MicroUSB.
[Four types of wireless trigger modes]: Wireless trigger for Godox strobes, outdoor flashes, studio flashes, Canon/Nikon/Sony original strobes, Canon/Nikon/Sony camera shutters, etc. Can work as a flash trigger with 3.5mm sync cord jack.
Product specifications
flash exposure control
TTL auto flash: E-TTL II
Manual flash: support
Strobe flash: support
wireless flash
Transmission Distance (Approx.): Up to 328 feet/100 meters
Built-in wireless: Godox X 2.4GHz
Modulation mode: MSK
Channel: 32
Wireless ID: 01~99
Group: 5 TTL and manual
HSS (High Speed Synchronization): Support
Rear curtain sync: Support
Flash exposure compensation: Supported, ±3 stops in 1/3 stop increments
Flash exposure lock and focus assist: Support
Modeling lamps: control modeling lamps globally or individually
Audio beep: support
Wireless Shutter: Acts as a receiver to control camera trigger via 3.5mm sync cord jack
Firmware upgrade: Upgrade via Type-C USB port
Memory function: settings will be saved 2 seconds after the last operation and will be recovered after reboot
