Description
39800mAh Jump Starter 1200A LED Display Wireless Charging Power Bank for 12V 4-6L Cars and Motorcycles
Specifications:
Item Type: Jump Starter
Material: ABS
Built-in Battery Type: Polymer Lithium Battery, 1060110 High-rate Battery
Battery Capacity: 39800mAh
Service Life: 5000 Times or More
Color: Red
Fully Charged Ignition Times: 30 Times
Charging Time: About 8 Hours
Output Voltage: 12V on the Car Side, 5V-2A on the USB Side
Charging Input Interface: DC Interface
Input Voltage: 15V
Input Current: 1A
Peak Current: 1200A
Starting Current: 600A
Voltage: 100V-240V
Applicable Models: Applicable to 12V4.0L Diesel vehicles within, gasoline vehicles 12V6.0L
Scope of use: suitable for charging mobile phones, headphones, laptops, tablets, cameras GPS, PSP and other digital devices
Special functions: with LED intelligent digital display, real-time display of battery remaining capacity, output current and voltage values, support mobile phone wireless fast charging.
9 types of protection: reverse connection protection, short circuit protection, overvoltage protection, overheating protection, overcharge protection, magnetic field protection, over-discharge protection, overcurrent protection, extremely low power consumption
LED lights: 3 (4 lighting modes, strong light LED + explosion-proof light + flashing explosion-proof light + SOS warning light, range greater than 30m/98.4ft)
Starter size: approx. 17 x 9 x 4.5 cm / 6.7 x 3.5 x 1.8 inches
Packing list:
1 x 39800mAh emergency starter
1 x home charger
1 x car charger
1 x clip
1 x instruction manual
1 x storage bag
Peak current: 1200 A
Certification: ce
Special functions: lighting, SOS lighting
Voltage: 12V
Conversion rate: 80%~85%
Battery capacity (mAh): >30000
External test certification: ce
Number of built-in batteries: >6
Battery capacity: 39800mAh
Peak current: 1200A
Starting current: 600A
Product name: emergency starter
Input voltage: 15A
Input current: 1A
Service life: more than 5000 times
Applicable models: diesel vehicles <12V4.0L, gasoline vehicles <12V6.0L
Note:
1. Please read the product manual carefully before use.
2. When starting the car, insert the blue plug of the battery clip firmly into place, otherwise it will affect the starting effect and even cause the plastic of the connector to melts.
3. If the car cannot be started, please check whether the battery clamp is well clamped, whether the battery connector is rusty or dirty, and continue to start after cleaning. If it fails to start after 3 attempts, do not force it to start, otherwise the product will be damaged, and the vehicle should be further checked for other faults.
4. Do not clamp the battery clamps at both ends, otherwise it may cause a safety accident.
5. Please take off the host within 30 seconds after the car is started, otherwise it may cause a safety accident.
6. Do not disassemble the machine by yourself, otherwise it may cause a safety accident.
How to use:
Step 1: Connect the red end of the battery clip to the positive electrode of the car battery, and the black end to the negative electrode of the car battery.
Step 2: Make sure that the jump starter switch is turned off, and connect the do port of the battery clip to the jump starter.
Step 3: Start the car with normal ignition, and remove the jump starter within 30 seconds of successful starting.