Specification:
Origin: Mainland China
Type: Module
Condition: New
Model Number: Digital Magnetic Isolator
Operating voltage: 2.7-5.5V
Working current: 0.8mA
Product size: 15*10*3mm/0.59*0.39*0.12in
1.ADUM1201 is a 1-channel directional dual-channel digital isolator based on the
2. Based on Analog Devices, Inc.'s iCoupler technology, which combines high-speed CMOS with monolithic transformer technology and has superior performance to other devices such as optocouplers.
3. iCoupler devices do not use LEDs and photodiodes, and therefore do not have the design difficulties that usually exist with optocouplers.
4. The simple iCoupler digital interface and stable performance features eliminate current transfer ratio uncertainty, nonlinear transfer functions, and the typical temperature and longtime effects of optocouplers.
5. Eliminates the need for external drivers and other discrete components.
6. At comparable signal data rates, iCoupler devices consume 1/10th to 1/6th of the power of the optocoupler.
Features:
1. Higher speed.
2. Minimum operating current of 0.8mA.
3. Higher performance timing accuracy, transient common-mode rejection, and degree of inter-channel matching are superior to traditional optoisolators.
4. Integration is smaller, the printed circuit board (PCB) area of 40% of the traditional opto-isolator.
5. Application: RS-232/RS-422/RS-485 transceiver isolation
6. Low Power Consumption: ADUM1201 adopts a low-power design with low power consumption, which can satisfy applications requiring high energy efficiency.
7. Wide Operating Temperature Range: ADUM1201 has a wide operating temperature range to adapt to the application requirements of different environmental conditions.
Note:
1. GND1 and GND2 are two different reference grounds, otherwise the isolation effect will not work.
2. When ADUM1201 is working normally, both ends should be powered at the same time to ensure that both channels of ADUM1201 can work normally.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
