Hign-concerned Chemical : None
Material Type : plastic
Wire or Wireless : Wire
Origin : Mainland China
Car Parking Camera Video Channel Converter Car Camera Rear Front Converter Two-Way Control Box Smart Rear View Camera Controller
Material: Plastic
Working Voltage: 9-16V
Working Current: MAX: 30MA
Video Output: 1.0VPP/75 Ω
Video Format: PAL/NTSC
Clarity: 720P
Working Temperature: -20 ℃ -80 ℃
Storage Temperature: -40 ℃ -85 ℃
Image Sensor: 1/3 COLOR CMOS
Automatic Photosensitive: Yes
Applicable Vehicle Models: Most models of vehicles
Feature
1. Automatic photosensitive, waterproof and anti fog
2. Two channel video control box, intelligent switching
3. Intelligent processing chip, two video frames can be freely switched, and the front, rear, left, and right reversing cameras are intelligently universal
4. Easy installation and good concealment
Functions
① Automatical front view when starting:
When car engine starts,the system will activate the car monitor and
front camera to check the front view for 8 seconds, then turn off.
② Automatically rear view:
When you pull the reverse gear , the system will activate the monitor
and rear view camera till the reverse gear back, then switches to front
view camera video for 15 seconds then shut off.
③ Front view always activate mode:
Press the control switch to enter Front view always activate mode.
In this mode, the system will activate monitor and the front view
camera always.
To quit the mode, press the control switch again.
Working Priority: Back View>Front View
Product Installation (please read carefully)
Step 1:
- Remove the plastic box from the back box and locate the positions of the three power cords.
- Reverse light forward (blue power cord). Please connect the power cord of the reversing light to.
- AG power supply positive pole (red power cord), please connect to the ACC wiring position.
- Negative grounding (black power cord). Please connect the negative wire harness to the vehicle.
Step 2:
- Install the camera, remove the license plate light, and pass the camera through the license plate.
- Connect the gap between the board lights to the main unit, connect them to three power lines, and start the vehicle for adjustment. Adjust the reverse angle. Secure the camera with screws.
- Installation is complete.
Package List
1 Set Car Parking Camera Video Channel Converter
Notes:
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
