SOP8 finished product with connecting wire, suitable for 24 25 93 95 series 8-pin chip with 1.27MM pitch
It will naturally wear out if it is used too many times, causing the chip to not be clamped tight
At this time, you need to press the clip with your hand to burn
Nowadays, the FLASH chips of many motherboards, routers, set-top boxes, LCDs, game consoles, etc. are SOP8 8-pin SMD packages, and they are directly soldered on the circuit board. If you want to burn and update, you must remove the chip and put it on the burner. Burning is very troublesome.
The most important thing is that most users have lived for so many years and have never used a soldering iron, let alone know how to remove the chip. There are also professional maintenance experts. Although the soldering skills are proficient, but always desoldering, it is inevitable to damage the PCB pads. The gain is not worth the loss. With this burning folder, none of the above problems are a problem. It is easier to refresh the BIOS than to buy a cabbage.
If the chip is soldered on the circuit board, it will be affected by the peripheral circuit of the circuit board and it may not be able to burn online. According to experience, some motherboard 25 BIOS chips will not be affected, and some cannot be recognized, and those that cannot be recognized can only be removed. Use the programming board to solder and burn.
This is an actual problem, related to the circuit design of each device, and has nothing to do with us
USB Programmer
Condition: New
Support 24EEPROM and 25 SPI flash 8pin/16pin chip
USB to TTL port, can getroot online
With CH341A chip
Recognize 25 series chip automatically
And support download STC series procedure of singlechip
With 24/25 status indicator lamp
SPI pin to support expanding the utility
Color is shown as pictures
PLS NOTE that due to lighting effects, monitor's brightness/ contrass settings ect, there could be some slight differences in the color tone of the pictures and the actual item!
Provide 5V-3.3V power supply output
