in Tritec Tracing Stand Treviewer A2 Gray LED Thin 7 Level Dimming 3 Year Warranty [Made Japan] A2-450

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Brand new and made in Japan. Since we manufacture and sell our products at our own factory in Japan, we can respond to any breakdowns within a few days. Comes with a 3 year warranty. The thickness is 10mm at the front (excluding the rubber feet) and 26mm when the rear stand is folded. Thin and light (3.6Kg), convenient to store and carry. 1. Convenient for tracing work that involves copying from sketches, and for inspecting films, photographs, and products. 2. It uses LED for power supply, so it has a lifespan of about 40,000 hours. Therefore, the lamp cannot be replaced. 3. LEDs have a low heat generation temperature, so unlike fluorescent lights, the temperature of the equipment will not rise in the summer and make it difficult to work. 4.LEDs do not flicker like fluorescent lights. 5. Since the top board is made of a single piece of acrylic, there are no seams or steps, and the paper will not be damaged. 6.The thickness is as thin as 10mm, so it does not take up much space. The thickness is 10mm at the front (excluding the rubber feet) and 30mm when the rear stand is folded. Thin and light (3.6Kg), convenient to store and carry. 7. The tilt angle of the top plate can be adjusted in 3 levels, so you won't get tired of tracing work for long periods of time. Fold the legs for storage. If you do not need a stand depending on your usage, you can use a Phillips screwdriver to remove the two screws on each side of the stand attachment, and then reinstall it. 8.The power switch and power adapter jack for connecting to 100V are provided on the main unit. 9. Occurs with some EL lamp methods. No strange sounds will be generated. 10.It is sold only on the Internet, so it has excellent cost performance. 11.Since our products are manufactured and sold directly from our Japanese factory, we provide prompt after-sales service. 3 year warranty. 12. ON/OFF by touch sensor, 7-step dimming function, illuminance can be changed in 7 steps between 900 and 4600 lux, and even if you turn it off, when you turn it on again, it will turn on at the original OFF brightness. This function reduces eye strain because the illuminance is brighter when the document is on thick watercolor paper, and darker when the original is on thin copy paper or product inspection, allowing you to work with the illuminance appropriate for the task. 13.■Customer usage examples■ -Shaking sutras/shaking set Sutra paper/shaking sutras Brush/shaking sutras Used for tracing. It was a good deal compared to the one exclusively for copying sutras.