KRATKI FLOKI L Left Air Fireplace 12 kW Ø200 Black Set for Installation

KRATKI FLOKI L Air Fireplace Left 12 kW fi 200 Black

The Floki steel fireplace is a combination of modern design and advanced combustion technology. GLASS glass visually enlarges the space, providing a beautiful view of the flames. The TERMOTEC chamber lining increases combustion efficiency and retains heat for longer. The air supply system from the back and sides ensures even combustion and lower fuel consumption. As a result, Floki is an economical and ecological choice. SCHOTT ROBAX heat-resistant ceramic and high-quality steel guarantee durability and safety. The fireplace minimizes harmful emissions, taking care of the environment. Floki is a stylish element of modern interiors and a reliable heat source.

FLOKI L Steel Wood Fireplace – heats from 100 m² to 160 m²

Ecodesign Ecodesign is a European initiative aimed at improving energy efficiency and reducing pollutant emissions.

BImSchV 2 BImSchV 2 is a German law concerning air pollution control, covering the requirements for fireplaces and stoves. Devices that meet the BImSchV 2 standards must have low emissions of harmful dust and gases.

Heat Recovery Heat recovery is the process of recovering heat from the air expelled from a building and transferring it to the incoming air. Thanks to heat recovery, heating costs can be significantly reduced.

The set includes:

FLOKI L LEFT 12 kW fi 200 BLACK Fireplace

Flex Pipe fi 125 - 1 pc

Clamping Band - 4 pcs

Insulation Tape - 1 pc

Steel Pipe 200/0.5m x 1 pc

Steel Pipe 200/1m x 1 pc

Adjustable Steel Elbow 200/90° x 1 pc

Ceramic Chimney Connector 200 x 1 pc

Base for FLOKI Fireplace - 1 pc

Silikon 1200 - 1 pc

LUFT 9 x 80 x 40 - 1 pc (Black)

LUFT 9 x 80 x 40 SF - 1 pc (Black)

MAX Adhesive for Tiles 4kg - 1 pc

K-84 Adhesive - 4 pcs

Mounting Plug - 16 pcs

Insulation Plate - 20 pcs

General

Fuel type: seasoned hardwood (moisture ≤20%)

Nominal power (kW): 10

Heating power range (kW): 4.5 - 13.5

Material: steel

Thermal efficiency (%): 83

Flue gas temperature (°C): 240

Maximum log length (cm): 50

Minimum required active area of exhaust grills (cm²): ≥700

Minimum required active area of intake grills (cm²): ≥500

Type of glazing: Corner

Door opening: Left

Physical parameters

Weight (kg): 154.5

Flue gas outlet diameter (mm): 200

Width (cm): 79.9

Height (cm): 120.4

Depth (cm): 49.4

Certifications/Compliance

Meets Ecodesign criteria: YES

Suitable for heat recovery: YES

Compliant with BImSchV 2 standard: YES

Energy Efficiency

Energy Class: A +

EEI coefficient: 110.4

CO emissions (at 13% O2) ≤ specified in %: 0.09

Particulate emissions (dust) (mg/Nm³): 28

Equipment

Air intake

Combustion chamber lining

Decorative glass pane

BLACK TERMOTEC

ROTARY FLUE GAS OUTLET

Allows changing the flue gas outlet position, making it easier to connect the insert. The 360° adjustment allows for connecting the flue gas outlet both from the back and top of the insert.

REMOVABLE GRATE

Allows access to the ash container, making it easier to maintain the insert in a clean condition.

TERMOTEC LINING

The combustion chamber is lined with TERMOTEC, a material that accumulates heat, increasing the temperature inside the fireplace.

INNOVATIVE HANDLE

The specially perforated handle construction prevents overheating.

BUILT-IN AIR INTAKE REGULATION

The air intake from the outside is controlled by a built-in damper located below the door.

PIPES FOR SYSTEM CONNECTION

The flue pipe is intended for connecting wood-burning fireplace inserts to existing chimney ducts.

VENTILATION SYSTEM

The fireplace grille is an aesthetic finish for the channels distributing warm air from the fireplace.

PLATES FOR DIY INSTALLATION

The set includes heat-resistant plates that you can easily use to create the fireplace enclosure.

MAX Adhesive

Perfect solution for mounting IZOL fireplace plates.

Tile Adhesive

The tile adhesive is a special adhesive for use in fire protection and high-temperature techniques.