USB Gateway CC2652P2 For ZigBee3.0 ZigBee2mqtt Home Assistant

Description： The main chip adopts CC2652P, a multi protocol wireless MCU with integrated success rate amplifier

Support Bluetooth 5.2 Low Energy, Thread, For Zigbee 3.0 protocols

Painless access to Home Assistant's ZHA integration or For Zigbee2Mqtt plug-in.

You can also access for Hassl0 in For OpenWrt

Include:1 PC

Programming method

1: Use XDS110. Connect to XDS110 with adapter cable. After connection, open

The corresponding firmware can be downloaded to the device.

2: Use USB port to download in For BOOTLOAD mode

Insert for DONGLE into the USB port of the computer, identify the serial port (CP2102 drive), and open the software,Select the corresponding chip to download

If the program has been downloaded in the chip, you need to manually enter the B0OTLOAD mode. After connecting the USB, press and hold the RESET button, press and hold KEY1, then release the RESET button, and then release the KEY1 button. At this time, the device will enter the For BOOTLOAD mode. Select the corresponding operation.