Feature:
1. Automatic Identification: This meter can realize automatic identification, which can choose corresponding gear and range, no need to change gears to make measurement easy.
2. Safe to Use: With built in fuse overload protection measures and equipped with voltage resistant relays, you can use this meter with confidence!
3. LED, Backlit Display: Equipped with a LED and a backlit screen, you can use more conveniently at night.
4. Rubber Case: Equipped with an industrial grade rubber protective cover to achieve dual protection, built in test pen storage bag and hanging hole on the back of the protective cover, anti drop and wear resistance, comes with a long life span.
5. Excellent Performance: With 1 second response and accurate measurement, close to 0 error, this meter performs very effectively!
Specification:
Item Type: Digital Multimeter
Model: HT123
Material: ABS
Battery: 1.5V AAA Battery x 2 (Without Battery)
Application: Electrical Parameter Measurement
Basic Parameters:
DC Voltage:
Range: 4V
Resolution: 0.001V
Range: 40V
Resolution: 0.01V
Range: 400V
Resolution: 0.1V
Range: 600V
Resolution: 1V
Accuracy: + (1.0percent Reading+ 5 Digits)
Measurable Voltage: 0.8V 600V
Overload Protection: 600V
Maximum Measuring Voltage: 600V
AC Voltage:
Range: 4V
Resolution: 0.001V
Range: 40V
Resolution: 0.01V
Range: 400V
Resolution: 0.1V
Range: 600V
Resolution: 1V
Accuracy: + (1.2percent Reading+ 5 Digits)
Measurable Voltage: 0.8V 600V
Overload Protection: 600V
Frequency Response: 40 to 1000Hz True RMS
Resistance:
Range: 4K Ohm
Resolution: 0.001k Ohm
Range: 40K Ohm
Resolution: 0.01k Ohm
Range: 400K Ohm
Resolution: 0.1k Ohm
Range: 4M Ohm
Resolution: 0.001M Ohm
Range: 40M Ohm
Resolution: 0.01M Ohm
Accuracy: + (1.2percent Reading+ 5 Digits)
Overload Protection: 250V
NOTE:
1. Before using the instrument, please read this manual carefully, and use the instrument strictly in accordance with the operation of this manual, otherwise the protection function provided by the instrument may be damaged or weakened.
2. Use extreme caution when measuring beyond 60VDC, 30VAC RMS or 42V peak. Such voltages present a danger of electric shock.
3. Do not measure voltages higher than the rated value between terminals or between terminals and ground.
4. Check whether the meter is working properly by measuring the known voltage. If it is abnormal or damaged, do not use it.
5. Before using the instrument, please check whether the casing of the instrument is cracked or the plastic parts are damaged. If so, please do not use it again.
6. Before using the meter, please check whether the test s are cracked or damaged. If so, please replace the test s of the same model and electrical specifications.
7. Use the meter according to the measurement category, voltage or current rating specified on the meter or manual.
8. Follow local and national safety regulations. Wear protective equipment (such as approved rubber gloves, masks, flame retardant clothing, etc.) to prevent injury from electric shock and arcing when hazardous live conductors are exposed.
9. When the low battery indicator of the meter appears, please replace the battery in time to prevent measurement errors.
10. Do not use the meter around explosive gas or water or in a humid environment.
11. When using the test s, keep your fingers behind the probe finger guard.
12. When measuring, please connect the neutral wire or ground wire first, and then connect the live wire; when disconnecting, please disconnect the live wire first, then disconnect the neutral wire and ground wire.
13. Before opening the case or battery cover, remove the test s from the meter. Never use the meter with the meter disassembled or with the battery cover open.
14. The meter can only meet the requirements of safety standards when used with the provided test s. If the test is damaged and needs to be replaced, it must be replaced with a test of the same model and electrical specifications..
Package List:
1 x Digital Multimeter2 x Test Pen 1 x Manual
