[Product Infomation]
Brand : ELECTRO-HARMONIX
Materials : Alminium, Steel
[Product Description]
・Generate infinite sustain by sampling the notes you play
・If you freeze a chord, etc., you can play a solo etc. on top of it.
-You can layer sounds one after another each time you press the footswitch, and in that case you can set how much of the previous sound is retained.
- Equipped with an effect loop, allowing you to apply additional effects to Superego's effect sound
Product introduction
■Product description
The Superego Synth Engine samples the notes you play and produces infinite sustain.
If you freeze a chord, etc., you can play a solo over it.
By smoothly greasing a frozen sound to the next sound, you can create an effect similar to portamento on a synth.
You can also layer sounds one after another each time you press the footswitch, and in that case you can set how much of the previous sound is retained.
There is also an auto mode in which the unit automatically freezes single notes and chords without having to operate a footswitch.
It also has an effect loop, allowing you to apply additional effects to Superego's effect sound.
■Specifications
・3 Foot Switch mode
[Momentary] Freezes the sound only while the foot switch is pressed. Fade in/out of the freeze sound can be adjusted with the Speed control.
[Latch] Each time you press the button, the sound will be layered. The volume of the sound before layering can be adjusted with the Layer control.
[Auto] Detects single notes and chords and freezes. You can adjust the fade out of the freeze sound using the Speed control.
・Speed/Layer control: Depending on the mode, adjust the fade in/out of the freeze sound and the volume before layering.
・Gliss control: Adjust the speed at which the frozen sound changes to the next sound.
・Dimensions: 91mm(W) x 118mm(D) x 50mm(H)
・Weight: 330g
・Power supply: 9V DC center negative adapter JP9.6DC-200 (included)
*When using with an adapter, be sure to use the genuine adapter JP9.6DC-200 (included).
Please note that if damage or malfunction occurs due to the use of an adapter made by another company, the product may not be covered by the warranty even if it is within the warranty period.
This product is a product from a distributor in Japan.
Please note that parallel import products cannot be guaranteed by an agency.
Attention (Disclaimer) > Please read carefully
When using an adapter, be sure to use the genuine adapter JP9.6DC-200 (included).
Please note that if damage or malfunction occurs due to the use of an adapter made by another company, the product may not be covered by the warranty even if it is within the warranty period.
[Important Note - For Overseas Customers]
Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.
1. Legislation and safety standards
This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country.
Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.
2. About electrical products
[Voltage compatible]
When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.
[Plug type]
Our products use the Japanese plug type (A type or B type).
Please use a conversion adapter if necessary.
[Important notes regarding transformers and adapters]
A transformer adjusts the voltage to suit the requirements of the equipment.
Conversion adapters only change the shape of the plug and do not adjust the voltage.
Using only the conversion adapter without a transformer may damage the product.
[About responsibility]
We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.
3. Language and manual
Product instructions and displays may only be in Japanese.
The English version of the manual can be downloaded from our website.