Core Technology Analysis
1. Intelligent repair system
Active Silicone: penetrates into the deeper layers of the material to fill micro-cracks, repairing up to 0.3mm in depth.
Optical brightening particles: selective reflection of light, visually eliminating aging white marks.
Elasticity memory factor: with temperature changes to maintain flexibility, to avoid cracking.
2. Triple protection matrix
Anti-dust and anti-fouling: surface tension is reduced to 22dyn/cm, making it difficult for dust to attach.
UV protection: SPF50+ level of sun protection, slow down the aging speed of 300
Friction Resistance: Pass 5000 times friction test without failure
3. Full material compatibility
Suitable for ABS plastic, polypropylene, artificial leather, natural rubber, etc.
Effective on mahogany veneer and carbon fiber pattern.
Passed the material compatibility test of automobile factory
Five product advantages
1. One-click refreshing
Automatic leveling after spraying, 10 minutes to complete the whole car interior refurbishment, no need for professional skills.
2. Original Texture
Restore the matte/high-gloss effect of the parts when they leave the factory, eliminating the cheap “greasy feeling”.
3. Long-lasting protection
Original “molecular anchoring” technology, the protective layer can resist more than 50 times cleaning.
4. Safe and environmentally friendly
Does not contain silicone oil migration components, does not damage sensitive electronic components.
5. Economical and efficient
120ml can treat the whole car interior 3-4 times, the cost is only 1/10 of the beauty store.
Professional construction guide
1. Standard Process
Deep cleaning: use special cleaner for interior trim to remove oil and dirt.
Masking protection: cover the area that should not be treated with the beautiful paper.
Uniform spraying: cross spraying 20cm from the surface.
Natural leveling: leave for 5 minutes to allow the product to spread.
Finish check: Wipe excess product from edges with microfiber cloth.
2. Enhancement Tips
Heavily deteriorated parts: Pre-treat with the supplied repair pads.
High-gloss surfaces: Avoid touching for 24 hours after application.
Long-term parking: quarterly treatment is recommended.
3. Precautions
️ The construction environment temperature should be between 10-35℃.
️ Leather parts should be tested on a small area first.
️ Avoid contact with moisture until fully cured.
Teslim edilmediğinde para iadesi
