Feature:
1. Input and Output: control AC solid state relay, 3‑32VDC input, 40A 480VAC output, and adopts optical isolation between the input and output circuits.
2. Good Performance: This solid state relay adopts transistor output, low conduction voltage drop, fast switching speed, with control and TTL logic interface.
3. With LED Indicator: This solid state relay is equipped with LED indicator to display the working status, clear and intuitive, greatly improving work efficiency.
4. Integrated Epoxy Resin: With epoxy resin integrated packaging, this solid state relay has good corrosion resistance, which is shockproof, and .
. Applications: This SSR relay is widely used in industrial automation, weak and strong current isolation control, motor, solenoid valve, electromagnetic vibrator, battery charging and discharging switch, etc.
Specification:
Item Type: Solid State Relay
Model: VSR8 40DA48Z
Input: 3-32VDC
Output: 40A 480VAC
Load Current Range: 0.05 to 40Arms
Maximum Current 10mSec: 200%
Load Voltage Range: 60-1200VDC
On State Voltage Drop: ≤0.-4.6
Off State Voltage: 60V, 80V, 250V, 400V, 600V, 2900V, 1200V
Overvoltage : Transient Voltage: 80V, 180V, 470V, 1000V
Switching Characteristics: Mos or IGBT, Solid State Non Contact Switching Characteristics
Dielectric Strength Input to Output (50/60Hz): 2500Vrms
Dielectric Strength Input Output to Base (50/60Hz): 2500Vrms
Minimum Insulation Resistance (at 500 VDC): 10°Ω
Load Current Safety Factor: Resistive Load: 2.-3 times, Inductive Load: 3-6 times
Operating Temperature Range: -30-80℃
Storage Temperature Range: -30-100℃
Humidity: IEC60068-2-78 95%
LED Input Status Indicator: Red
Package List:
1 x Solid State Relay
Note:
Note:
1. The heat generated during the of the relay needs to be dissipated through the base plate. It is necessary to that the relay base plate is in tight contact with the heatsink, firmly installed, and the contact needs to be equipped with a thermal pad or coated with thermal silicone grease.
2. The relay terminals should be firmly connected. Loose connections can cause abnormal heating and damage to the product. The recommended installation torsion for M4 terminals is (1.2‑2.0) N·m, and for M5 terminals is (2‑3) N·m.
3. When the ambient temperature during is high, please refer to the temperature curve for derating use.
Warning:
1. The side and base plate of the product will generate heat during use, please touch after cooling.
2. Before installing or using this product, that all power is disconnected.
3. Please check all connections before turning on the power.
