Thin Pedal Riser Thin Wide Pedal Riser Effector Velcro Raise Bottom Raise For Fixing [114mm Wide]

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- A new member of the Thin Pedal Riser series, the Thin Pedal Riser 114mm Wide, has arrived. This Pedal Riser is the perfect accessory for raising slightly larger effects such as Strymon. The width and length are designed to be approximately the same size as Strymon's under panel. Not only Strymon, but also slightly larger effectors can be raised firmly. By using it horizontally, you can also mount two mini-sized effectors. Adopts a raised amount of 14mm common to the series. Although the amount of elevation is modest at 14mm including Velcro, it has many conveniences unique to this size. For effect boards with frames such as the ARMOR and Kyoritz KC series, the effect board frame and jack may interfere, but this problem can be resolved with many effects by raising the jack by 14mm. Since the amount of elevation is not excessive, the lid can be closed with boards with low lid clearance, such as the Kyoritz EC-50 and Almor PS-3C, which are commonly used in Japan (they may come in contact with the sponge on the top lid) (not all combinations are guaranteed) When adjusting the height when lining up with tall effectors such as BOSS, or placing effectors front and back, you can set them naturally without raising them too high like conventional pedal risers. The main body is made of durable iron with a thickness of 1.6mm, and can firmly support even heavy effectors. Furthermore, the effector is securely fixed to the board with a strong Velcro tape finish with a slightly long bushy foot. There is no need to worry about misalignment while moving or playing. The four corners of the effector's ground surface are angled to allow protrusions such as rubber feet and screws to escape. This allows you to place the effector stably. Thin Pedal Riser 114mm Wide is an original product of GBD MUSIC. A new member of the Thin Pedal Riser series, the Thin Pedal Riser 114mm Wide, has arrived. This Pedal Riser is the perfect accessory for raising slightly larger effects such as Strymon.