Feature:
1. [2 SIDED COATING] The steel plate has gold powder and smooth PEI double sided coating, which can meet 2 kinds of printing requirements.
2. [SAFE OPERATION] Just put the flexible steel plate on the hot bed of the 3D printer to use, with convenient and safe operation.
3. [EASY REMOVING] The steel plate can be easily removed by bending and ejecting, and it is easy to print and maintain.
4. [SPRING STEEL] Made of excellent spring steel material, they will not kinks or warp when slightly bent, and they are easy to adhere to the printed surface.
5. [PRODUCT SIZE] The size of the steel plate is 355 x 355mm, which can be used for the same size building plate, suitable for Voron 350 V2 model.
Specification:
Item Type: Flexible Steel Plate
Material: Steel
Color: Golden Steel Plate
Product Size: Approx. 355 x 355mm 14 x 14in
Applicable Model: For Voron 350 V2
Print Reference Temperature:
Material
Hot Bed
Nozzle
Description
PLA
50 60 celsius
200 210 celsius
Support Both Sides.
ABS
70 120 celsius
240 250 celsius
Recommended for powdered surface, the surface is easy to foam when the temperature of the smooth surface exceeds 80 celsius
PETG
60 85 celsius
230 245 celsius
Support Both Sides
Carbon Fiber
50 60 celsius
200 220 celsius
Support Both Sides. Close to PLA, hardened steel nozzle is recommended
TPU
50 60 celsius
200 220 celsius
Support Both Sides
Wood
50 60 celsius
200 220 celsius
Support Both Sides. Close to PLA
.
Package List:
1 x Steel Plate1 x Magnetic Sticker B side and PEI Coating
Note:
1. The steel plate is elastic steel plate, and the printing plate needs to be flat when used, and the magnetic attraction is strong, which can firmly adsorb the plate on the plate.2. The first layer sprinklers should not scratch the platform, otherwise the sprinklers will scratch the platform and wear out the sprinklers.3. When printing the first layer, the nozzle should not be too far away from the platform, otherwise it will not stick to the printing platform, and the gaps between the nozzle and the steel plate should be about a piece of A4 paper.4. The model cooling fan cannot be turned on for the first layer printing, otherwise it will affect the adhesion of the first layer printing.5. Add a skirt when printing a model with a small contact surface.
Ingen leveringsrefusion
