Diy Plastic Homemade Tofu Maker Press Mold Kit Tofu Making Machine Set Pressing

Product Specification : 1.Material:Tofu maker mold: plastic 2.Size (approx.):as shown 3.color:as shown Packing List : 1*Tofu Maker Box How to Use: 1.Steamed tofu box frame on no less than a flat chassis, then steamed tofu box back on the shelf (prepare their own steam tray, flat chassis, spoon). 2.Tofu cloth diagonal spread on the cover, so that tofu cloth attached to the inner wall of the lid and bottom. 3.The scoop spoonful into soybean curd tofu cloth inside (plaster tofu: pressurized water before the curd can be broken into chunks, over 2-3 minutes and then the pressure can improve the toughness of tofu). 4.Pull tight cloth diagonal keep tofu curd. 5.Tofu Packed half box of water, the pressure on the wrapped bean curd (when anhydrous dropping pressed tofu has a good explanation). 6.Lift the tofu box, drained the water inside, opened the cloth tofu, tofu snapping back into the box as tofu inside lid. 7.After turning right and lift the lid tofu, tofu cloth removed, you can access tofu. Note: Please be reminded that due lighting effects, monitor's brightness/contrast settings etc, there could be some slight differences in the colour tone of the website's photo and the actual item. Item Measure by hand, it could be 1-3cm different,your kind understanding will be much appreciated. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.