Sphere Light Turn Signal LED SUNTURN2 T20 Single 2200lm Amber

• [Instant lighting with sharp light] Adopts a high-brightness LED chip, with a large amount of light of 2200lm, giving it an outstanding presence. And unlike halogen lights, which light up gradually, LEDs provide bright illumination and light up sharply and instantaneously, making it easier to convey directions to other vehicles and pedestrians, helping to prevent accidents.

• [Enhanced high flash countermeasures] LED bulbs usually consume less power than genuine bulbs, so the car body will recognize that the bulb has run out and cause a malfunction. This is a so-called high-flash situation, and it is necessary to take measures to prevent the high-flash phenomenon by introducing cancellers. This product uses the same power consumption as a genuine bulb, so it is designed to prevent the high flash phenomenon. Furthermore, it is equipped with a high-performance fan, which further strengthens the cooling function and prevents heat sag, further strengthening the countermeasures against high flash.

• [Non-polar & Easy Installation] Since it is non-polar, it is a simple plug-in replacement just like the genuine replacement. Since there is no need for an after-installed canceller, installation is possible without any machining, which greatly reduces installation man-hours and work time. Furthermore, since it is the same size as the genuine bulb, it can be installed regardless of the car model.

• [Vehicle inspection compatible] The brightly illuminated LED is of course vehicle inspection compatible, and this product is compatible with both front and rear turn signals. Please check the valve shape of your car before purchasing.

• [Product specifications] Product name: SUNTURN2, Shape: T20 single, Quantity: 2, Lumens: 2200lm, Color: Amber, Compatible voltage: 12V, Power consumption: 24W, Warranty period: 1 year from the date of purchase

The SUNTURN series, which does not require a high-fraction canceller, has been updated.

-Brightness is 2200lm (total value of 2 lights). It is about 3 times brighter than the original bulb. Vibrant and sharp flashing enhances the quality of your car. The color is the same amber color as the genuine bulb.

・Strengthening countermeasures against high traffic. A high-performance fan installed at the tip of the valve firmly prevents high flashes from occurring.

・Very easy to install. Just replace the genuine ball with an unprocessed pop. The size is also the same as the genuine bulb, so it can be installed regardless of the car model.

Up until now, when converting turn signals to LEDs, high flashes always occurred due to the low power consumption. As a countermeasure for this, it was necessary to connect a separate resistor, and since this resistor became extremely hot, the installation location had to be selected, and the bumper had to be attached and detached, making installation difficult.

In the SUNTURN series, the bulb body has high flash protection, and it is possible to convert to LED by simply replacing the bulb. The light intensity is approximately three times that of the original bulb, and it also serves as an emergency flashing indicator light that fully indicates the presence of your vehicle, increasing safety.

[Specifications] Lumen: 2200lm (total value of 2 lights) Power consumption: 24W Operating voltage: DC12V Color: Amber Quantity: 2 pieces

[Set contents] LED bulb x 2 Instruction manual

Before purchasing, please check the vehicle model, engine model, drive system, year, grade, etc. with the vehicle inspection certificate and caution plate, and be sure to check the manufacturer's website to see if there are any errors in vehicle compatibility.