Automatic Watering System USB Intelligent Garden Irrigation Watering Timer

Feature: 1. The water storage container is free to choose, there is no fixed faucet limit, and you can water where you want to water. 2. Weak current protection function, when the battery power is low, the device will automatically stop watering to protect itself. 3. Three power supply modes are available: USB plug power supply, plug power supply and battery power supply (battery not included). Free and convenient, can be used anywhere. 4. The built‑in suction pump, has 2.5m lift height, and there is no need to worry about the height of the flowerpot. 5. Intelligent automatic timing watering, watering parameters can be set freely according to needs to meet the needs of different plants. Specification: Item Type: Watering Timer Material: ABS+PP Color: As shown in the picture Product Size: Approx. 9.7x8.5x8.5cm 3.8x3.3x3.3in Weight: Approx.819g 28.9oz Battery: 4 x AA batteries (not included) Rated Current: 720mA Interface Diameter: Φ4.8mm 0.19in Supporting Pipeline: 4 6, 4 7 Maximum Water Pressure: more than 30psi (200pa) Flow: 0.3 0.8LPM Noise: less than 65db (30cm 11.8in distance) Working Temperature: 0 50 celsius Lift Height: more than 2.5m 8.2ft Suction Lift Height: more than 2m 6.6ft Application: Garden sheds, flower beds, patios, courtyards, balconies, offices, etc. Two modes of operation process: 1. Manual mode: a. Power on, press and hold the switch button for 3 seconds to start the watering controller; b. Click the set button to select a pump port; c. Click the open close button, the pump starts to run; d. Click the set button and select the pump port; e. Click the Open Close button to stop the pump 2. Set automatic mode: a. Power on, press and hold the switch button for 3 seconds to start the watering controller; b. Click the set button to select a pump port; c. Click the set button to set the watering time; d. Click the set button to set the interval time; e. Click the set button to set the number of cycles; f. Click the set button, it will automatically stop running after watering . Package List: 1 x Watering Timer(Battery Not Included)1 x Power Adapter1 x USB Cable20 x Dripper20 x Tee1 x Hose(15m)2 x Filter1 x Cross Screwdriver1 x Instruction Manual Note: 1. Due to the water level difference of the closed pipeline, the pipeline will have a siphon effect. Just adjust the relative position of the dripper and the water source to solve this problem.2. It is generally recommended that the water source be placed on the ground, and the dripper should be higher than the water level.3. The dripper must be inserted in place, otherwise it will cause insufficient water for the dripper behind.4.