Product features:
It is produced from A quality stainless steel in molds specific to the brand and model of your vehicle.
It gives your vehicle an aesthetic and stylish appearance and makes you feel special.
It is perfectly compatible with the specified brand and model.
It is delivered ready for installation with double-sided adhesive tape.
Assembly Instruction:
Its installation is very simple, anyone can easily install it without needing service.
It does not require drilling/cutting into your vehicle during installation.
After removing the product from its packaging, be sure to perform a pre-assembly exercise on the area where it will be applied before removing the protective surface of the double-sided tape.
The environment in which you will mount should be dry and dust-free. Cleanliness of the floor is very important for installation. For this reason, thoroughly clean the surface on which the product will be adhered with a cleaning liquid (alcohol, spirit, cellulosic thinner, etc.).
Perfumed cologne, wet wipes, gasoline, etc. Do not use liquids containing additives.
In order for the double-sided tape on the back of the product to show its full properties, the ambient temperature must be above 25C°. After removing the protective surface of the tape, use a hair dryer etc. to increase the adhesion strength. Slightly heat the tape and the surface on which the product will be attached.
When the ambient or surface temperature reaches an appropriate level, apply the product to the cleaned area at once.
Make sure it adheres well by applying pressure with a dry cloth.
In order for the product to adhere firmly, protect it from water for 24 hours and do not wash your vehicle with pressurized water for 48 hours.
Prekė iš Turkijos
Nėra pristatymo grąžinimas
