Detail：
1. Samrt but poweful making a big difference
2. 7 modes to fully meet a variety of clinical needs
3. Uniform beam,strong penetrability
4. Less light loss
5. Light intensity up to 3000 mW/cm²
Technical Specifications :
Size of main uint: 23mm×23mm×204mm
Net weight of main unit: 108g
Applied parts of the equipment: Top of main unit, Point cure lens
classified by power supply
The power supply by the rechargeable batteryRechargeable Lithium battery:
Battery model:18500, Battery capacity: 2000mAh
Battery has over-voltage, over current and short circuit protection
Adapter(charge) Input: 100-240V~ 50/60Hz 0.4A Max.
Output: 5.0V 1A
10W high power
Wave length: 385nm~515nm
7 MODES TO FULLY MEET A VARIETY OF CLINICAL NEEDS
Well-controlled and can fully meet various clinical needs. Normal High Turbo Ortho Soft Pulse Check
1. Normal ModeConstant light intensity: 1000- 1200mw/c㎡
Suitable for most treatment scenarios, Such as illings, restorations, etc.Time setting: 5s, 10s, 15s, 20s
2. High ModConstant light intensity: 1 800-2000 mw/c㎡
Suitable for quick curing, ensuring enough curing depthTime setting: 3s, 5s
3. Turbo ModeTime setting: 1s, 3s 2700-3000mw/c㎡
Ultra-high light intensity enables 1 sec curing of 2mm resin.
4. Ortho ModeTime setting: 3s*5, 3s*10， 2700- 3000mw/c㎡
High light intensity with strong penetrability, especially suitable for orthodontic bracket bonding
5. Soft ModeLight intensity is gradually increasedfrom 0 to 1200mw/c㎡
Time setting: 5s, 10s, 15s, 20s
Effectively reduce the shrinkage rate of resin; Lower the risk of microleakage
6. Pulse ModeThe LED will stop for 0.4s at an interval of 0.6s curing. When working in a cycle of treatment, it can effectively reduce heat generation, efficiently dissipate heat and ensure the comfort of diagnosis and treatment.
Time setting: 5s, 10s, 15s, 20s
7. Check ModeThis mode outputs a single purple light. When special glasses are worn, the caries are obviously orange-red.
Application: Detection of caries, calculus and cracked tooth
Nėra pristatymo grąžinimas
