Product Name
OK Model Borksi 131L
Brand Introduction
OK模型 is a renowned Japanese RC aircraft manufacturer widely recognized for providing thrilling acrobatic flying experiences. They are highly regarded among flight enthusiasts for their high-performance, reliable models.
Product Description
Performing rolls, loops, and spins is a thrilling experience with this model's thick symmetrical wing shape and rectangular wing design, which helps prevent stall during extreme maneuvers while allowing for easy recovery. The new main wing structure, although not immediately visible, is both rigid and lightweight. The top front opens as a hatch allowing for easy electrification and easy troubleshooting for fuel tank issues. Enjoy hassle-free flying with a user-friendly open cowl design. This is an ARF model with pre-applied film covering; assembly requires joining the main wings and installing the engine and electronics. Due to the film material, it may have wrinkles or sagging, which can be resolved by applying heat with a model iron.
How to Use
Prepare the necessary items based on the power source you intend to use. The main items required include:
- Airplane transmitter and receiver
- Standard servos × 3
- Mini servo Tahmazo TS-D1134MG(48908) × 2
- Engine mount or motor mount
- Fuel tank (about 200cc)
- Spinner 51mm
- 2-cycle 25-40 class engine or brushless motor
- APC propeller 9x5 to 11x5
- Extension cords PILOT ST200mm(47499) × 2, PILOT ST100mm(47498) × 2
- Adhesives: OK Bond HW(43010), FX(43451), and epoxy adhesive (30-minute curing type)
Specifications
- Model Number: OK-11343
- Overall Length: 1130mm
- Wingspan: 1310mm
- Wing Area: 31.3dm²
- Total Weight: 1.7-1.8kg
- Motor: Tahmazo ER-281411dBM(48802)
- Engine: 2C25-40 class
- RC Equipment: AL(2), RD, EV, TH or ESC
- Flight Difficulty: Intermediate level
- Completion Status: Film covered completion
- Usable Power Units: Electric motor/glow engine
Precautions
This product does not include the engine mount, fuel tank, motor mount, or spinner, which should be prepared according to the power source you choose. Standard servos refer to those approximately 20mm wide and 40mm long with a torque of 3.5kg or more. If you opt for an electric power source, conversion is easily done with the ePack25.
To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.
Prekė iš Japonijos 
Nėra pristatymo grąžinimas
