Shinwa Sokutei Basic 35mm Plasterboard Detector with 79025 Magnet,

---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer.

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- When installing curtain rails, shelves, picture frames, handrails, earthquake-resistant brackets, etc., you can reliably find studs behind the wall. It has a scale so you can check the approximate thickness of the wall you have inserted. It comes with a magnet so you can easily find the metal behind the wall. Needle: Can be used in walls up to 35mm thick. Magnet: Can be used in walls up to 13mm thick and ceilings up to 12mm thick. *When searching for iron materials behind plasterboard, the range in which the magnet can be used will vary depending on the conditions. This is a needle-type base finder designed specifically for plasterboard. It cannot be used on reinforced plaster. If you feel any resistance in the base after inserting the needle, do not push it any further. The needle may break or bend, or it may remain stuck in the base wall when you try to pull it out, damaging the needle holder.