42V DC 2.1*5.5mm Power Adapter Lithium Battery Charger Replaceable Plug Power Charger AC100-240V Plug Power Adapters

Brand Name : WAPUNO Model Number : Lithium Battery Charger Power Source : Ac Origin : Mainland China Type : Electric Use : Standard Battery Output Power : 74.6-150(include150) Package : Yes Display screen : Yes Quick charge : Yes Intelligent Charge : Yes Voltage range : Low voltage non-USB (below 75V DC, below 50V AC) Data Transmission : No High-concerned chemical : None 1. Brand new and high quality.2. Made of high-quality materials, durable.3. Smart charger: Multiple protections to ensure safety.Just plug in and it will maintain the battery automatically.4.connectors: The charger come with 2.1X5.5mm 1-prong DC plug/8mm 3 Prong Connector5. Fast and Smart: Fast charge with high current. Green light means full charged or disconnected. Don't use for Lead Acid bat Specifications:Color: BlackApplicability: For Lithium Battery (NOT Included.)Input Plug: EU PlugOutput Plug: 5.5 x 2.1MMx Inner Diameter/ 8mm 3 ProngInput: AC 100 240V, 50/ 60HzOutput: DC2.1X5.5MM /8MM 3 PONG 42V 2APower Supply Cable Length: 95cm (Approx. )Adapter Cable Length: 90cm (Approx.) 5.5X2.1MM DC Package Contents:1*Power Adapter Charger1*DC plug 8mm 3 ProngPackage Contents:1*Power Adapter Charger1*8mm 3 Prong plug 42V 2A for xiaomi Package Contents: 1*Power Adapter Charger1*42V 2A for xiaomi M365 8mm

WARNINGS• To reduce the risk of injury, charge only 42V with the charger. Do not charge a non-rechargeable battery. Other types of batteries might burst, causing personal injury or other damage!• Do not disassemble the charger. Have it serviced or repaired by qualified service personnel. Incorrect assembly can result in risk of electric shock or fire.• Never use the charger as a DC power source for any electrical equipment.• Never operate a charger with a damaged cord or plug. Inspect both input and output cords for any damage before using the charger.• Never unplug a cord by pulling on the cord itself. Always grasp the plug when disconnecting the charger.• For indoor use only. Do not expose charger to rain, snow or excessive moisture.• Never charge a frozen battery.• The battery must be placed in a well-ventilated area during charging.• Do not use the charger while the equipment is operating.Note: Check maximum Amp input rating of battery. Using a charger with an amp output that is too high may cause permanent damage. input rating of battery.Please NoticeCompatible for Lithium Battery (Li-on Battery) and the battery capacity is 36V.NOT fit for Razor scooter and dirt bike! NOT fits the model number: LBW11 scooter.Usage Process1. Check the voltage and connector of your battery. 2. Connect the charger to AC, LED turns GREEN. 3. Connect DC output to Battery. LED turns RED means fast charging. 4. LED turns GREEN from RED means battery full charged. 5. Disconnect the charger from AC and battery.If your scooter is not charging, it may be for one of the following reasons:1. The charger is not compatible with your scooter.2. Your battery is damaged due to the limited life of lithium batteries. If your battery has been used for more than 12 months or has not been used for 2-3 months, your battery may be damaged.3. If the green light is on when you plug in the charger, but when you connect the scooter, the green light does not turn red but stays on and the charger does not work. This is because the positive and negative (+/-) connectors of our charger do not match the positive and negative (+/-) connectors of your scooter and your scooter has no power, you can try to connect the charger to your scooter from a different connector.4. If the green light is on when you plug in the charger, but goes off when you connect the scooter, it's because the internal short circuit of the scooter has caused the self-protection function of the charger to fail, you'd better check the scooter battery and replace it.5. Don't use for Lead Acid battery. Scope of useBattery pack, Harley electric vehicle, balance car, electric four-wheel vehicle, electric vehicle, scooter, unicycle, robot, tricycle Use and maintenance of the charger :--1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug.--2. When the LED light turns green, please continue charging for 2-3 hours.--3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged.--4. long-term shallow discharge battery, about 3 months, for a deep discharge.--5.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the LiFepo4 battery, otherwise the charger will be got incredibly hot.