J-bus entrance & driver seat (7.5w LED) + step LED

• LED: 5050SMD type 3x4 12 stations 2 pieces 5050SMD type 7.5w 5 stations S25 socket 2 pieces

• Compatible voltage: 24-30V High voltage compatible

• Compatible socket: Driver & boarding entrance 7.5 LED T-10 parallel pin (step)

• LED color: White (6300k) approx.

• Size: 12 steps 18mm x 40mm x 2mm, 5 steps S25 outer diameter 18.5mm x total length 51.5mm

Product description

This is a highly requested set of 12 J-Bus step lights, entrance lights, and driver's seat lights using 5050SMD. This is for the J-Bus standard model. The base of the step light is 2mm thick, and the wiring and double-sided tape have been newly designed to achieve high quality. The design was designed to be as unaffected by heat as possible in a very limited space. To install, just replace the normal one and stick it on the glass surface with double-sided tape. 7.5w 5 LEDs are set in the entrance and exit and driver's seat using S25 parallel pin sockets. This is our original product, and its heat resistance has been confirmed. This is a general-purpose type, so please check the product size below and if it matches, it can be used for other products. It can also be used as a courtesy light for trucks. The delivery note will serve as your warranty card and will serve as a reference for future repeat orders, so please keep it in a safe place even after the warranty period has expired. How to wear ★Please refer to your vehicle's owner's manual when installing. ★It is very hot right after your car's normal bulb turns off. Allow it to cool down sufficiently before working on it. ★Once you have confirmed the installation space, wiring, coupler, etc., turn off the power, remove the normal bulb, and install this product, but before doing so, please make sure that the light is lit. At this time, please never touch the valve part of both the standard product and this product. And please install carefully. ★Finally, connect the wiring, clean the mounting glass surface, and secure it with double-sided tape.

Caution (Disclaimer) > Please read carefully

Please note that under no circumstances will we be able to bear the labor costs or any other expenses associated with installation.